Specifications - Craftsman CMXCESM162 Instruction Manual

Automatic battery charger
Table of Contents

Advertisement

Available languages

Available languages

ENGLISH
PROBLEM
The battery is properly
connected, but the
Charging LED never lit.
The Bad Battery LED
is lit.

14. SPECIFICATIONS

Input Voltage ....................................................................................................... 120V AC @ 60Hz, 3.6A
Output Voltage ............................................................................. 6V or 12V, with auto voltage detection
Output Current Rating:
CMXCESM258 ....................................................................2A DC @ 6V DC; 3A/12A DC @ 12V DC
CMXCESM162 ....................................................................2A DC @ 6V DC; 3A/15A DC @ 12V DC
POSSIBLE CAUSE
The battery voltage is low.
The battery voltage is still below 10V
(for a 12V battery) or 5V (for a 6V
battery) after 2 hours of charging.
(or)
In maintain mode, the output current is
more than 1.5A for 12 hours.
Desulfation was unsuccessful.
Lack of progress is detected and battery
voltage is below 14.2V (for a 12V
battery) or 7.1V (for a 6V battery).
The battery's initial voltage is below
12.2V (for a 12V battery) or 6.1V (for
a 6V battery) and the total input is less
than 1.5 Ah.
The battery voltage drops to below
12.2V (for a 12V battery) or 6.1V (for a
6V battery) in Maintain Mode.
Press the START/STOP button to start
charging.
The battery may be defective. Make
sure there are no loads on the battery.
If there are, remove them. If there are
none, have the battery checked or
replaced.
The battery may be defective. Have
battery checked or replaced.
The battery may be overheated.
If so, allow the battery to cool. The
battery may be too large or have a
short circuit. Have battery checked or
replaced.
The battery capacity is too low, or the
battery is too old. Have it checked or
replaced.
The battery won't hold a charge. May be
caused by a drain on the battery or the
battery could be bad. Make sure there
are no loads on the battery. If there are,
remove them. If there are none, have the
battery checked or replaced.
• 10 •
SOLUTION

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cmxcesm258

Table of Contents