Advertisement
Available languages
Available languages
•
The rear surface of the tumble dryer shall
be placed against a wall.
B
DANGER!
Do not place the dryer on the power cable.
* Ignore following warning if your
product's system does not contains
R290.
DANGER!
•
Dryer contains R290 refrigerant.*
•
R290 is an environment-friendly, but
flammable refrigerant.*
•
Ensure that the air inlet of the dryer is
open and it is well-ventilated.*
•
Keep potential flame sources away from
the dryer.*
3.2 Removing the transportation
safety assembly
A
WARNING!
3.3 Connection of water drain hose on
products with vapour feature
You can directly drain accumulated water
through the water drain hose supplied with
the product instead of periodically draining the
water collected in the water tank
C
NOTE
•
Follow the diagram below to connect
water drain if your drying machine is
equipped with vapour spray feature.
Dryer / User Manual
•
Remove the
transportation
safety assembly
before using the
dryer for the first
time.
•
If the door swing
side of your
appliance can
be modified, see
the reversible
door mounting
instructions.
1
2
C
3
C
4
C
1 Pull hose at the behind of the dryer by hand in
order to disconnect it from where it is connected.
Do not use any tools to remove the hose.
2 Install the B end of water drain hose provided
with your machine to the end of the hose you
have removed from the machine.
3 Install the A end of water drain hose provided
with your machine to the location you have
removed the hose on the drying machine.
4 Fix the C end of the water drain hose to the
waste water drain or the sink directly.
B
A
A
B
A
B
9
Advertisement
