Advertisement
Available languages
Available languages
C
NOTE!
•
Adding laundry after the drying operation
starts may cause the dried laundry inside
the drying machine to mix with wet
laundry and leave the laundry damp at
the end of operation.
•
Adding or removing laundry during drying
may be repeated as many times as you
wish. But this operation continuously
interrupts the drying operation, and thus
increases program duration and energy
consumption. So, it is recommended to
add laundry before the program starts.
•
If a new program is selected by turning
the program selection button while
the drying machine is in stand-by, the
running program terminates.
WARNING !
• Do not touch the inner surface of the drum
while adding or removing clothes during a
continuing program. The drum surface is hot.
5.10 Cancelling the program
If you want to cancel the program and
terminate the drying operation for any reason
after the drying machine starts running, turn the
On/Off/Program Selection button; the program
terminates.
A
WARNING !
•
The inside of the drying machine shall
be extremely hot when you cancel the
program during machine operation, so
run the refreshing program to allow it to
cool down.
5.11 End of program
When the program ends, the LED's of End/
Wrinkle Prevention and Fibre Filter Cleaning
Warning on the program follow-up indicator
turn on. Loading door can be opened and
drying machine is ready for another operation.
Turn the On/Off/Program Selection button to
On/Off position in order to turn off the drying
machine.
18
C
NOTE!
•
If the Wrinkle Prevention mode is active
and the laundry is not removed after
the program is completed, the wrinkle
prevention function activates for 2 hours
to prevent the laundry inside the machine
to get wrinkled. The program tumbles
the laundry with 10-minute intervals to
prevent them from wrinkling.
5.12 Odour feature
If your drying machine has odour feature, read
the ProScent manual to use this feature.
5.13 General Description of Steam
Programs
Steam programs
You can use steam programs to reduce the
odour of your laundry and to reduce the
wrinkling to minimum.
You need to sort your laundry according to the
type and thickness.
When steam programs are running, some noise
may happen during steam formation.
The result of wrinkle reduction and
deodorization may vary depending on the type
and amount of your laundry, and the selected
program.
After completing the steam programs, you
must immediately take out the laundry from
the machine and hang them within at least 15
minutes without wrinkling them.
Making the machine operable.
Before using steam programs for the first time,
the steam tank needs to be filled. In the first
use, drying must be made using a program
other than the steam program.
Steam program operation:
1.
Open the machine and select the
program one of the main steam
programs.
Easy Iron
Dryer / User Manual
Advertisement
