Table of Contents
Advertisement
<Precautions in reassembling the traverse block>
Take the following precautions when reassembling the traverse block.
1. Turn traverse gear on the traverse block to let trigger lever turn
rightward (Front view).
2. Bring cam gear lever to the lever adjusting position at the end of
mechanical chassis unit.
3. Put tabs A and B into slots A and B respectively.
Place tabs C into hooks to mount the traverse block on
mechanical chassis unit (Slot A... Mechanical chassis unit, Slot
B... Cam gear).
PDF created with pdfFactory Pro trial version
44
www.pdffactory.com
Advertisement
Table of Contents
