Advertisement
•
Step 4: Then mount the wheels in the following order:
a) Place one wheel on the axle with the valve stem pointing outwards.
b) To fix the wheel, use the 12 mm washer and then the 12 mm nut (22). Tighten them firmly.
•
Step 5: Place the trolley on its wheels. Fix the pull handle, yoke washer, and plastic coupling
by using the 8 × 60 mm pull handle bolts (26), 8 mm washers (20), and nuts (21).
•
Step 6: Fix the locking handles to the grate with the help of the 8 mm washers (20) and
nuts (21).
Note: Do not tighten yet the nuts completely for they need to be adapted after mounting the
grate.
•
Step 7: Fix the front, rear, left, and right grate with the help of R pins. With the help of the locking
handle, bring the grates to an upright position and tighten the nuts of the locking handle. Make
sure that the nuts are not tightened too firmly to ensure smooth operation. Place the small grate
case on the trolley.
Technical specifications
Max. load (㎏)
Weight (㎏)
Size (㎜)
Wheels (㎜)
Max. pressure (bar)
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
300
20
965 × 510 × 550
⌀ 270 × 77
2.06 (30 psi)
Item 51182
Page 4
09
2021-1
Advertisement
