Download Print this page

WilTec 62316 User Manual

Workshop tool cart with 3 trays

User's manual

Workshop Tool Cart with 3 Trays

62316

Illustration similar, may vary depending on model

Please read and follow the operating instructions and safety information prior to initial operation.

Technical changes reserved!

Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further

developments.

Table of Contents

Need help?

Do you have a question about the 62316 and is the answer not in the manual?

Page 1 User’s manual Workshop Tool Cart with 3 Trays 62316 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further...
Page 2 The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man- ual, nor in the diagrams and illustrations shown.
Page 3 2. Attach the outer sides of the cart to the base plate. 3. Fix the other drawers to their appropriate spots. 4. At last, fix the handle to the right outer side. © by WilTec Wildanger Technik GmbH Item 62316 Page 3 http://www.WilTec.de...
Page 4 Base plate Fix rolls Drawer Important Note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 62316 Page 4 http://www.WilTec.de http://www.aoyue.eu 12 2021-1...