Origin Effects RD COMPACT HOT ROD Owner's Manual page 9

Origin Effects RD COMPACT HOT ROD
POST-DRIVE EQ controls (continued)
Use the tables below to help you set up the RD COMPACT HOT ROD for the first time with a new guitar
amplifier or flat-response device. Working through Steps 1 and 2 allows you to "set-and-forget" the
POST-DRIVE EQ controls and move on to having fun dialling in your ideal tone with the main controls.
Step 1: Set POST-DRIVE EQ switch for the connected amp or device
AMPLIFIER OR CONNECTED DEVICE
Power amp/FX return & guitar speaker
Mixing desk & cabinet simulation
Recording interface & cabinet simulation
Bright, mid-scooped guitar amplifier
Dark or Mid-rich guitar amplifier
Step 2: Fine-tune the POST-DRIVE EQ with the ADJ control*
HOW IS THE RD COMPACT HOT ROD TONE?
Too bright or thin
Too dark or woolly
*Please note: the ADJ control is not active when the POST-DRIVE EQ switch is in the P/AMP position.
Just right!
POST-DRIVE EQ SWITCH POSITION
TURN THE ADJ CONTROL...
Counterclockwise
Leave in this position and enjoy using the pedal!
9
www.origineffects.com
P/AMP
EQ1
EQ2
Clockwise