Fusion 24290 Quick Start Manual
Fusion 24290 Quick Start Manual

Fusion 24290 Quick Start Manual

2 solar coach style lamp posts

Advertisement

Quick Links

Trouble Shooting Tips

If your solar light does not come on at dusk despite following all
instructions please try the following steps:
1. Make sure that the solar light is not affected by any other light
source.
2. Ensure the solar light does not stand in the shade all day.
3. Check to see if the batteries are installed correctly.
4. If there is a protective film on the solar panel carefully remove
this.

Care Information

1. Clean any dirt and debris from the solar panel. The panel
cannot recharge if the light is obstructed. Use a soft cloth to clean
the panel. Do not use abrasives or chemicals that might scratch or
damage the UV coating.
2. In a region where snow and ice are likely and the light
assembly is covered with snow for an extended period of time the
batteries will require a recharge for at least 8 hours.

Warranty Information

1-YEAR LIMITED PRODUCT WARRANTY
This product is covered under a one year limited warranty.
Fusion Products Ltd. warrants to the original purchaser that
this product is free from defects in materials and workmanship
for the period of one year warranty from date of purchase.
For Technical Support and/or Warranty inquiries
please contact:
Fusion Products Ltd.
Monday to Friday
8:30-5:00 PM EST
2905 Argentia Road, Unit 2,3
Mississauga, Ontario L5N 8G6
Tel: 1-877-615-1378 Fax: (905) 812-3256
Email: sales@fusionproducts.ca
2 SOLAR COACH STYLE
LAMP POSTS
FUSION PRODUCTS LTD.
Model No. 24290

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 24290 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Fusion 24290

  • Page 1 1-YEAR LIMITED PRODUCT WARRANTY This product is covered under a one year limited warranty. Fusion Products Ltd. warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of one year warranty from date of purchase.
  • Page 2 Contents Battery Replacement Figure 7 STEP 1: Overview ................... see below Turn the switch to the <OFF> position (Figure 7). STEP 2: Getting Started ....................1 Remove the screws (4) underneath the perimeter of the solar top/housing. Carefully lift the solar About Your Solar Light ...................
  • Page 3 Installation (Hanging Lantern) Getting Started Please do not throw away any packing material until all parts are STEP 1: verified as present. Follow Steps 1- 6 in the Standard Installation. About Your Solar Light STEP 2: During the day your solar panel will convert the sun's light Secure hanging bracket (G) to top pole section with screw and/or UV rays into electrical power that will charge the until secure (Figure 5).
  • Page 4 Schematic Diagram Operation Figure 3 For First Time Use: Figure 1 STEP 1: Standard Fully charge the battery before first use. Figure 2 Charge under direct sunlight in the <OFF> Hanging A SOLAR HOUSING position for 2 days. STEP 2: Locate the ON/OFF switch on the outer B LANTERN HEAD perimeter of the solar housing (Figure 3).

Table of Contents