Related Manuals for Fusion Raven
Summary of Contents for Fusion Raven
- Page 1 Quick Setup Guide www.fusiontlc.com A Smart Team LLC Project 935 Falls Rd, Shelburne VT, 05482 Copyright © 2021 FUSION TLC...
- Page 2 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Mounting Raven On The Camera •...
- Page 3 Features, Warranty and Support Hello! Here are some of the features that come with your Raven. For more details on these features, scan the QR code and navigate to "Explore Raven" in the main menu. We’re delighted to invite you to our community of avid photographers and creators. With the...
-
Page 4: Physical Orientation
Press and hold the Shoe Release buttons on both sides of the Raven and then slide the Raven Hot shoe onto the hot shoe mount of the camera. Do not force the Raven onto the hot shoe mount or Nose cone light / you risk breaking the locking pin. - Page 5 Wifi setup for firmware updates Charging Raven battery First you will need to connect your Raven to a 2.4GHz Wifi network. Once the Wifi is The Raven has a built-in 2500 mAh rechargeable lithium-ion battery that delivers up to 16...
- Page 6 From the Zone Control Display swipe from the top to the bottom. If the reset of the Raven does not work, and the issue still exists, please contact us. Tap on the cloud icon and the Raven will search the cloud for available updates.
- Page 7 Zone control display (main screen) Enable a zone: A zone that is enabled will display an intensity value in its respective quadrant. If a zone is not enabled, no intensity value will be displayed. If a zone is enabled, the Raven will Zone letter trigger it.
- Page 8 Navigating Interface Navigating Interface Zone mode screen Enable/disable TTL This menu is accessed by pressing the central zone edit icon in the Zone Control Display. To enable or disable a feature, simply touch the icon. If the icon is green, the feature is enabled, if it is gray, the feature is disabled.
- Page 9 Primary brand channel selection: press this button to quickly change the channel for your primary remotes. This setting will also active the RF noise level indicator for each channel. Cloud firmware update: the Raven’s firmware can be updated as needed via the cloud, Nose cone light enable/disable when the Raven is connected to WiFi Screen brightness: allows you to adjust the brightness level of the Raven’s screen, either...
- Page 10 From the main menu, swipe down to get to the quick settings screen menu. Then tap the Press the Test button on the Raven to send a test flash command to all active zones. If a flash primary/secondary brand selection button at the bottom. Select your primary and secondary does not fire, confirm the following: flash brand from the list of available flash brands.
- Page 11 WARNING: Changes or modifications to this unit not expressly approved by the This device complies with Part 15 of the FCC rules and also with RSS-210 of Industry Canada. party responsible for compliance could void the user’s authority to operate this Operation is subject to the following two conditions: equipment.
- Page 12 Follow Us Instagram Facebook YouTube...
Need help?
Do you have a question about the Raven and is the answer not in the manual?
Questions and answers