Advertisement
Quick Links
Trouble Shooting Tips
If your solar light does not come on at dusk despite following all
instructions please try the following steps:
1. Make sure that the solar light is not affected by any other light
source.
2. Ensure the solar light does not stand in the shade all day.
3. Check to see if the batteries are installed correctly.
4. If there is a protective film on the solar panel carefully remove
this.
SOLAR MOTION
Care Information
ACTIVATED SECURITY
1. Clean any dirt and debris from the solar panel. The panel
cannot recharge if the light is obstructed. Use a soft cloth to clean
the panel. Do not use abrasives or chemicals that might scratch or
LIGHT
damage the UV coating.
2. In a region where snow and ice are likely and the light
assembly is covered with snow for an extended period of time the
batteries will require a recharge for at least 8 hours.
Warranty Information
1-YEAR LIMITED PRODUCT WARRANTY
This product is covered under a one year limited warranty.
Fusion Products Ltd. warrants to the original purchaser that
this product is free from defects in materials and workmanship
for the period of one year warranty from date of purchase.
For Technical Support and/or Warranty inquiries
please contact:
Fusion Products Ltd.
Monday to Friday
FUSION PRODUCTS LTD.
8:30-5:00 PM EST
2905 Argentia Road, Unit 2,3
Model No. 16908
Mississauga, Ontario L5N 8G6
Tel: 1-877-615-1378 Fax: (905) 812-3256
Email: sales@fusionproducts.ca
Advertisement
Related Manuals for Fusion 16908
Summary of Contents for Fusion 16908
- Page 1 1-YEAR LIMITED PRODUCT WARRANTY This product is covered under a one year limited warranty. Fusion Products Ltd. warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of one year warranty from date of purchase.
- Page 2 Contents Battery Replacement (Remove Old) STEP 1: Turn the nut on the back of the light by hand in a counter clockwise Overview ................... see below direction to remove. STEP 2: About Your Solar Light ................... 1 Carefully remove the back cover of the light. STEP 3: Getting Started ....................
- Page 3 Installation (Remote Solar Panel) About Your Solar Light NOTE: If you choose, you can mount the solar During the day your solar panel will convert the sun's light and/or UV panel remotely from the light. Follow Steps 1-3 rays into electrical power that will charge the rechargeable battery. When below, and then proceed to “Installation it becomes dark, the solar light will turn on using the power stored on the (Mount Remote Solar Panel)”...
- Page 4 Your Solar Light Installation (Standard Wall Mount) STEP 1: Using the wall mount bracket as a guide, select desired installation location. STEP 2: Mark the holes where you will need to pre-drill for screws or wall anchors (if required). STEPS 3 & 4: Pre-drill holes for screws and use wall anchors as necessary (if required).