Mazda 2002 Protege Owner's Manual page 232

J39L(02MY).book Page 40 Thursday, November 1, 2001 10:49 AM
Maintenance and Care
Owner Maintenance
If the headlights or other electrical
components don't work and the fuses in
the cabin are OK, inspect the fuse block
under the hood. If a fuse is blown, it must
be replaced. Follow these steps:
1. Turn off the ignition switch and all
other switches.
2. Remove the fuse block cover.
Tab
3. If a fuse is blown, replace it with a new
one of the same rating.
Normal
When replacing the 100A fuse:
1. Turn off the ignition switch.
8-40
Form No. 8Q36-EA-01F
2. Remove the negative battery terminal.
3. Remove the A nuts.
4. Lift the fuse block and remove the B
B
Fuse block
cover
5. Replace the fuse with a new one of the
6. Install in the reverse order of removal.
Blown
bolts.
100A fuse
A
A
A
A
B
same rating.
A