Mazda 2002 MPV Owner's Manual page 53

J16L_EA.book Page 45 Friday, February 22, 2002 11:34 AM
M Child-Restraint System
Installation Procedure
(Second-Row Seats)
1. Slide the second-row seat as far back as
possible.
2. Raise the reclining lever and lower the
seatback forward.
3. Raise the seatback to the most upright
position. Make sure the seatback is
securely latched by rocking the
seatback.
Form No. 8Q44-EA-01K
Essential Safety Equipment
Child Restraint
4. Expand the area between the seat
bottom and the seatback slightly to
verify the locations of the LATCH
lower anchors.
LATCH lower
anchor
Second-row
seat
For right seat
5. Secure the child-restraint system using
BOTH LATCH lower anchors,
following the child-restraint system
manufacturer's instruction.
6. If your child-restraint system came
equipped with a tether, that probably
means it is very important to properly
secure the tether for child safety, please
carefully follow the child-restraint
system manufacturer's instructions
when installing tethers.
For left seat
2-45