Mazda 2002 MPV Owner's Manual page 13

J16L_EA.book Page 5 Friday, February 22, 2002 11:34 AM
(Manually operated seats)
To change the seatback angle, lean
forward slightly while raising the lever.
Then lean back to the desired position and
release the lever.
Make sure the lever returns to its original
position and the seatback is locked in
place by attempting to push it forward and
backward.
CAUTION
When returning a rear-reclined
seatback to its upright position, make
sure you support the seatback while
operating the seatback lever. If the
seatback is not supported, it will flip
forward suddenly and could cause
injury.
Form No. 8Q44-EA-01K
(Electrically operated seats)
Change the seatback angle by pressing the
front or rear side of the reclining switch.
When the seatback is at the desired angle,
release the switch.
Lever
Essential Safety Equipment
Seats
2-5