Combination Lap And Shoulder Belts - Mazda 2001 Tribute Owner's Manual

Seating and safety restraints
WARNING: After any vehicle collision, the safety belt system
at all outboard seating positions (except driver, which has no
"automatic locking retractor" feature) must be checked by a
qualified technician to verify that the "automatic locking
retractor" feature for child seats is still functioning properly. In
addition, all safety belts should be checked for proper function.
WARNING: BELT AND RETRACTOR ASSEMBLY MUST BE
REPLACED if the safety belt assembly "automatic locking
retractor" feature or any other safety belt function is not
operating properly when checked according to the procedures in
Workshop Manual.
WARNING: Failure to replace the Belt and Retractor assembly
could increase the risk of injury in collisions.

Combination lap and shoulder belts

1. Insert the belt tongue into the
proper buckle (the buckle
closest to the direction the
tongue is coming from) until
you hear a snap and feel it
latch. Make sure the tongue is
securely fastened in the buckle.
2. To unfasten, push the release
button and remove the tongue
from the buckle.
76