To Reinstall The Cross-Bar Assembly To The Roof Rack Side Rails - Mazda 2001 Tribute Owner's Manual

To reinstall the cross-bar assembly to the roof rack side rails:

1. Ensure that both cross-bar
assemblies are installed with the
F (front) arrow facing towards
the front of the vehicle.
2. Use a long, flat object to
depress the tongue in the
endcaps on both sides of the
cross-bar.
3. Slide the tie down loops and the cross-bar assemblies over the end
cap tongue and into the side rails.
4. Tighten thumbwheel at both
ends of the cross-bar.
Driving
133