Advertisement
Quick Links
SF fashion / Technical Manual
1. Frame system
2. Frame parts
3. Devices / Tools
4. Technical data of bevel and lens
5. Mounting instructions for standard temple
6. Mounting instruction for raster temple
7. Disassembly: Temple, nosepad
8. Typical mounting mistakes
9. Basic fitting in Lab
10. Cleaning
Swissflex fashion (SFFA)
Version 04
Optik Werkstatt
Advertisement
Related Manuals for swissflex SF fashion
Summary of Contents for swissflex SF fashion
- Page 1 SF fashion / Technical Manual 1. Frame system 2. Frame parts 3. Devices / Tools 4. Technical data of bevel and lens 5. Mounting instructions for standard temple 6. Mounting instruction for raster temple 7. Disassembly: Temple, nosepad 8. Typical mounting mistakes 9.
-
Page 2: Frame System
12 matt colors 7 Fronts Pictures of all the elements above are available in the legend and the color overviews of the order forms. perfekte Passform modulare Individualität 100% Swiss-made Swissflex fashion (SFFA) Version 04 | Page 1-1 Optik Werkstatt... -
Page 3: Frame Parts
2. Frame parts Front Pad adapter Nose pad Temple Swissflex fashion (SFFA) Version 04 | Page 2-1 Optik Werkstatt... - Page 4 3. Devices / Tools Tools Article code Diagonal cutting nipper 632N 70003005 Mounting tool for pad clip 70003007 Former 70311003 Swissfl ex fashion (SFFA) Version 04 | Page 3-1 Optik Werkstatt...
- Page 5 4. Technical data of bevel and lens 10:1 Frontside Backside Swissflex fashion (SFFA) Version 04 | Page 4-1 Optik Werkstatt...
- Page 6 5. Mounting instructions for standard temple Preparation. Milling and grooving the lens to the correct shape and size (use the checking device). A sefty bevel of 1/10 frontside and 2/10 backside facilitates inserting the lenses. Caution: If the lens does not fi t properly (too small / too big / not adapted grooving depth) results in breakages or the lenses may fall out.
- Page 7 Fixing the frame at the bridge and the hinge the other way around to turn the lenses clockwise. Depending on the blocking system it is advisable to remove the blockers before further working steps. Adapter for pad assembly. Swissflex fashion (SFFA) Version 04 | Page 5-2 Optik Werkstatt...
- Page 8 Preparation of pad assembly. Inserting the mounting aid into the pad. Placing the bridge with the mushroom downwards vertically on the mounting aid and pushing it down until it clicks into place. Swissflex fashion (SFFA) Version 04 | Page 5-3 Optik Werkstatt...
- Page 9 Fixing the bake. Position the temple in an angle of 45° to the front. Insert the pin of the temple in the hinge. View of the inserted lower pin of the temple. Swissflex fashion (SFFA) Version 04 | Page 5-4 Optik Werkstatt...
- Page 10 Inserting the upper pin of the temple in the hinge until it clicks in. Mounted frame is ready but not pre-fitted. More information in the fitting chapter. Swissflex fashion (SFFA) Version 04 | Page 5-5 Optik Werkstatt...
- Page 11 Marking the intersection point. Determination of the necessary allowance and adding it to the length of the temple. Shortening the temple to the desired length. Use the tool side cutter 632N. Swissflex fashion (SFFA) Version 04 | Page 6-1 Optik Werkstatt...
- Page 12 Application of glue (only on cut surface) in small quantity with immediate assembly. Remove any visible glue immediately. Official product for glueing earpieces is Loctite 4850. Caution! Observe the safety regulations regar- ding glues and solvents. Swissflex fashion (SFFA) Version 04 | Page 6-2 Optik Werkstatt...
- Page 13 Removing the nose pad. Press the wings with both thumbs down- wards until the pad clicks out. Remove adapter. Pushing in the directions of the arrow. Swissflex fashion (SFFA) Version 04 | Page 7-1 Optik Werkstatt...
- Page 14 Incomplete fixing of the frame before tur- turn it clockwise. ning. Danger of breakage or deforming of frame. Correct Incorrect Fit of the adapter is okay. Check fit of adapter, possibly something tiny is blocking. Swissflex fashion (SFFA) Version 04 | Page 8-1 Optik Werkstatt...
- Page 15 Possible points for tuning. • Bridge (remove pad before) • Hinge • Temple (not in the area of the connection of hinge and temple) Adjusting the temperature to the respective clearance. Swissflex fashion (SFFA) Version 04 | Page 9-1 Optik Werkstatt...
- Page 16 Avoid alcohol (f.e. Isopropanol) and solvents. Incorrect cleaning. Not fixing the frame properly which results in a torsion between the lens and the frame. Swissflex fashion (SFFA) Version 04 | Page 10-1 Optik Werkstatt...
Need help?
Do you have a question about the SF fashion and is the answer not in the manual?
Questions and answers