Parking Brake - Jeep 2010 Patriot Owner's Manual

Hide thumbs Also See for 2010 Patriot:
Table of Contents

Advertisement

316 STARTING AND OPERATING
If necessary, add fluid to restore to the proper indicated
level. With a clean cloth, wipe any spilled fluid from all
surfaces. Refer to "Fluids, Lubricants, and Genuine
Parts" in "Maintaining Your Vehicle" for further
information.

PARKING BRAKE

Before leaving the vehicle, make sure that the parking
brake is fully applied. Also, be certain to leave an
automatic transmission in PARK, or manual transmission
in REVERSE or first gear.
The parking brake lever is located in the center console.
To apply the parking brake, pull the lever up as firmly as
possible. To release the parking brake, pull the lever up
slightly, press the center button, then lower the lever
completely.
Parking Brake
When the parking brake is applied with the ignition
switch in the ON position, the "Brake Warning Light" in
the instrument cluster will illuminate.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents