Jeep 2010 Grand Cherokee Owner's Manual page 382

Cooling System — Drain, Flush, and Refill
If the engine coolant (antifreeze) is dirty and contains a
considerable amount of sediment, clean and flush with
reliable cooling system cleaner. Follow with a thorough
rinsing to remove all deposits and chemicals. Properly
dispose of the old engine coolant (antifreeze).
Refer to "Maintenance Schedule" for further information.
Selection Of Coolant
Use only the manufacturer's recommended engine cool-
ant (antifreeze). Refer to "Fluids, Lubricants, and Genu-
ine Parts" in "Maintaining Your Vehicle" for further
information.
MAINTAINING YOUR VEHICLE 381
CAUTION!
• Mixing of engine coolant (antifreeze), other than
the specified HOAT engine coolant (antifreeze),
may result in engine damage and may decrease
corrosion protection. If a non-HOAT engine cool-
ant (antifreeze) is introduced into the cooling
system in an emergency, it should be replaced with
the specified engine coolant (antifreeze) as soon as
possible.
• Do not use water alone or alcohol based engine
coolant (antifreeze) products. Do not use addi-
tional rust inhibitors or antirust products, as they
may not be compatible with the engine coolant
(antifreeze) and may plug the radiator.
7
(Continued)