Content Planning notes Safety notes Unit description Unit installation Installation examples Electrical wiring Hydraulic connection Commissioning Shutdown Care and maintenance Repair Fan motor Condensate pump Unit dimensions Performance tables / technical data PWL 101-103 Performance tables / technical data PWL 201-203 Performance tables / technical data PWL 301-303 Intended use Customer service and guarantee...
REMKO PWL Planning notes Safety notes In order to achieve an optimum Cooling mode The units were subjected to comfortable temperature in a extensive material, functional and room, the planning of the room The following data is required to quality inspections prior to delivery.
Unit description The units must be installed away The units are stationary, indirectly The tube heat exchangers are ■ from traffic zones and installed fuelled recirculation cooling/ made of copper tubes with by crane, for example heating units with Cu/Al finned aluminium fins on top.
REMKO PWL Unit installation Make sure that no one is under the suspended load during installation! For safe unit installation, observe Use the template supplied in the packaging to mark the fastening points. the following instructions: Ensure that there is sufficient space between the unit and ceiling for the media connections.
Installation examples Heating mode The units are designed for use in both high and low-ceilinged rooms. Low-ceilinged rooms; horizontal discharge High-ceilinged rooms; vertical discharge The fan’s direction of rotation can be changed (pole switching) in order to adjust the air direction individually to the structural or personal requirements.
REMKO PWL Electrical wiring Hydraulic connection The electrical unit connections may Connecting several units Connection to the on-site only be established by authorised hydraulic system specialists in accordance with the If required, several units (also of applicable regulations, observing different sizes) can be operated...
Commissioning Drainage when at risk of Before initial commissioning freezing CAUTION Note that if using a speed ■ Complete static drainage of controller (accessory), the Commissioning can only take the finned heat exchangers is regulating device output must place once it has been assured not possible in the condition as be attuned to the total output that the proper assembly...
REMKO PWL Care and maintenance The units are basically During initial commissioning Ensure that no more ■ maintenance-free. Perform a visual condensate is formed, as inspection on the units and finned All regulating, control and safety the condensate pump is also...
Repair If the finned heat exchanger ■ NOTE CAUTION surface is coated with greasy or Repair and maintenance work Prior to maintenance or repair sooty particles, the exchanger may only be carried out by work, the unit must be discon- element can be removed and authorised and qualified tech- nected from the mains power...
REMKO PWL 400 V / 2-speed fan motor CAUTION Connection diagram The electrical unit connection High speed Low speed hohe Drehzahl niedere Drehzahl must be established by - Schaltung Δ - switching - Schaltung Y - switching ∆ authorised specialists in accordance with DIN EN 60335-1 and VDE 0116.
Unit dimensions NOTE Hydraulic connection R 1“ "A" The supply and return lines can be connected in any way Condensate hose Condensate pump View "A" Dimen- PWL 101-103 HK PWL 201-203 HK PWL 301-303 HK sions 985 mm 1084 mm 1178 mm 632 mm 963 mm...
“Certificate of guarantee” to Our units are carefully packed The units must only be operated REMKO GmbH & Co. KG at the and delivered in stable transport by appropriately instructed time when the units are purchased packaging and, if applicable, personnel.
REMKO PWL Legend / usable limits Finned heat exchanger The CU/AL finned heat exchangers are comprised of copper tubes with fitted aluminium fins. The connection pipes made of steel tubing are guided out of the housing on the angled sides. The non-twist connections are equipped with a 1˝...
Technical data Series PWL 101-103 HK PWL 201-203 HK PWL 301-303 HK Electrical connection 400/3~N 400/3~N 400/3~N Frequency Power consumption 0.10/0.07 0.28/0.18 0.36/0.22 Nominal current 0.26/0.13 0.67/0.37 0.84/0.46 Speed 920/750 920/750 920/750 2030/1685 3110/2580 4300/2650 Ventilation capacity for assembly 1 1960/1610 2900/2400 4150/2400...
Page 24
REMKO QUALITY WITH SYSTEMS Air-Conditioning | Heating | New Energies REMKO GmbH & Co. KG Telephone +49 (0) 5232 606-0 Hotline within Germany Telefax +49 (0) 5232 606-260 +49 (0) 5232 606-0 Klima- und Wärmetechnik Im Seelenkamp 12 E-mail info@remko.de...
Need help?
Do you have a question about the PWL Series and is the answer not in the manual?
Questions and answers