Subscribe to Our Youtube Channel
Related Manuals for REMKO PWL Series
Summary of Contents for REMKO PWL Series
- Page 1 REMKO PWL Ceiling-mounted air unit Heating/Cooling Operation · Technology · Spare parts Edition GB – Vo6...
-
Page 3: Table Of Contents
These instructions are part of the unit and must always be kept near to the site of installation or at the unit. Made by REMKO This operating manual is a translation of the German original. We reserve the right to make changes; no liability for errors and misprints! -
Page 4: Planning Information
REMKO PWL Planning information Safety information For an optimal room temperature, Cooling mode The units were subjected to ex- several basic rules must be follo- tensive material, functional and wed for room heating and cooling The following data is required for quality inspections and tests prior planning. -
Page 5: Unit Description
Unit description The units must only be operated These units are stationary, indirect- The inner supporting unit con- ■ in a completely assembled and ly recirculated air cooling/heating struction is made of galvanised mounted condition. units with copper/aluminium fin sheet steel. heat exchangers for connection to The heat exchangers have copper The units must only be opera-... -
Page 6: Mounting The Unit
REMKO PWL Mounting the unit Ensure that no persons are standing under suspended loads during instal- The following information must be lation! observed for safe unit installation: For marking the points of attachment, please use the supplied template in the packaging. It must be ensured that sufficient space is available The units must be arranged so ■... -
Page 7: Mounting Examples
Mounting examples Heating mode The unit are designed for use in rooms with high and low ceilings. Rooms with low ceilings; horizontal Rooms with high ceilings; vertical The direction of the air flow can blowing direction blowing direction be individually adjusted to the suit, the building conditions or personal requirements by changing the di- rection of rotation of the fan (pole... -
Page 8: Electrical Connection
REMKO PWL Electrical connection Hydraulic connection Electrical connections of the unit Connection of several units Connection to the local hy- must only be established by autho- draulic system rised specialists in compliance with If necessary, several units (also the applicable regulations of the... -
Page 9: Commissioning
Commissioning Draining if there is a risk of Before using for the first time frost ATTENTION It should be noted that when ■ Commissioning can only take It is not possible to statically drain using a speed control (acces- place when it is ensured that the fin heat exchanger completely sory) the power of the control mounting and electrical instal-... -
Page 10: Decommissioning
REMKO PWL Care and maintenance The units generally require no During initial commissioning It must be ensured that no more ■ maintenance. The units and fin condensate is produced as in exchanger surfaces must be vi- During initial commissioning, all... -
Page 11: Repair
Repair If the fin exchanger surface is ■ NOTE ATTENTION covered with grease or sooty Only authorised specialists Prior to carrying out mainte- particles, the exchanger ele- may undertake repairs and nance or repairs, the unit must ment can be removed and maintenance. -
Page 12: Fan Motor
REMKO PWL Fan motor 400V, two-speed ATTENTION Wiring Diagram Electrical connection of the hohe Drehzahl niedere Drehzahl unit must be carried out by - Schaltung - Schaltung ∆ authorised specialists as de- fined in DIN EN 60335-1 and VDE 0116. -
Page 13: Unit Dimensions
Unit dimensions NOTE Hydraulic connection R 1“ „A“ The flow and return can be connected as required. Condensate hose Condensate pump View „A“ Dimen- PWL 101-103 HK PWL 201-203 HK PWL 301-303 HK sions 985 mm 1084 mm 1178 mm 632 mm 963 mm 1043 mm... -
Page 14: Rating Tables/Technical Data Pwl 101-103
REMKO PWL PWL 101-103 - Heating • Rating tables • Technical Data Type PWL 101-H PWL 102-H PWL 103-H Type 2-speed 2-speed 2-speed Speed Electrical connection 400/3~N Frequency Power consumption 0.1/0.07 Nominal current 0.26/0.13 Air capacity m³/h 2030 1685 1960... - Page 15 PWL 101-103 - Cooling • Rating tables • Technical Data Type PWL 101-HK PWL 102-HK PWL 103-HK Type 2- speed 2- speed 2- speed Speed Electrical connection 400/3~N Frequency Power consumption 0.1/0.07 Nominal current 0.26/0.13 m³/h 2030 1685 1960 1610 1885 1530 Air capacity...
-
Page 16: Rating Tables/Technical Data Pwl 201-203
REMKO PWL PWL 201-203 - Heating • Rating tables • Technical Data Type PWL 201-H PWL 202-H PWL 203-H Type 2-speed 2-speed 2-speed Speed Electrical connection 400/3~N Frequency Power consumption 0.28/0.18 Nominal current 0.67/0.37 Air capacity m³/h 3110 2580 2900... - Page 17 PWL 201-203 - Cooling • Rating tables • Technical Data Type PWL 201-HK PWL 202-HK PWL 203-HK Type 2-speed 2-speed 2-speed Speed Electrical connection 400/3~N Frequency Power consumption 0.28/0.18 Nominal current 0.67/0.37 Air capacity m³/h 3110 2580 2900 2400 2850 2350 Sound pressure level dB (A)
-
Page 18: Rating Tables/Technical Data Pwl 301-303
REMKO PWL PWL 301-303 - Heating • Rating tables • Technical Data Type PWL 301-H PWL 302-H PWL 303-H Type 2-speed 2-speed 2-speed Speed Electrical connection 400/3~N Frequency Power consumption 0.36/0.22 Nominal current 0.84/0.46 Air capacity m³/h 4300 2650 4150... - Page 19 PWL 301-303 - Cooling • Rating tables • Technical Data Type PWL 301-HK PWL 302-HK PWL 303-HK Type 2-speed 2-speed 2-speed Speed Electrical connection 400/3~N Frequency Power consumption 0.36/0.22 Nominal current 0.84/0.46 Air capacity m³/h 4300 2650 4150 2400 3900 1710 Sound pressure level dB (A)
-
Page 20: Intended Use
When disposing of the packaging in industrial or commercial use. returned the enclosed “Warranty material, please think of the envi- document“ to REMKO GmbH & ronment. The units must only be operated Co. KG at the time of sale and Our units are carefully packed for by suitably trained personnel. -
Page 21: Exploded View
Exploded View Spare Parts List Designation PWL 101-103 HK PWL 201-203 HK PWL 301-303 HK EDV No. EDV No. EDV No. Heat exchanger Bg. 1 1110700 1110711 1110722 Heat exchanger Bg. 2 1110701 1110712 1110723 Heat exchanger Bg. 3 1110702 1110713 1110724 Electrical Terminal box... -
Page 22: Legend/Operating Limits
REMKO PWL Legend/Operating limits Fin heat exchanger The copper/aluminium fin heat exchangers consist of circular copper pipes with aluminium fins. The connecting pipes of thick-wall steel tube are lead out of the housing on the slanted sides. The twistproof connections have a 1“ inter- nal thread. -
Page 23: Technical Data
Technical data Series PWL 101-103 HK PWL 201-203 HK PWL 301-303 HK Electrical connection 400/3~N 400/3~N 400/3~N Frequency Power consumption 0.10/0.07 0.28/0.18 0.36/0.22 Nominal current 0.26/0.13 0.67/0.37 0.84/0.46 Speed 920/750 920/750 920/750 2030/1685 3110/2580 4300/2650 Air capacity Bg.1 1960/1610 2900/2400 4150/2400 Air capacity Bg.2 1885/1530... - Page 24 SFlb Customer Service Our equipment operates precisely and reliably. However, in the event of a fault, REMKO customer service is quickly at REMKO GmbH & Co. KG the scene. Our comprehensive Air conditioning and heating technology network of experienced dealers...
Need help?
Do you have a question about the PWL Series and is the answer not in the manual?
Questions and answers