Fixing the Wall Mount
1. Drill two holes with each diameter of 6 mm on the wall at the height of
99.8–101.8 cm above the ground, and ensure there is a distance of 56 mm between
two holes, then insert two wall plugs into the holes.
2. Align the screw holes in the wall mount with the wall plugs, then use two screws
(4×20 mm) to firmly secure the wall mount to the wall.
Note: It is recommended to fix the wall mount near an electrical outlet so that it can
easily connect to the power.
56mm
Wall Plugs
99.8-101.8cm
Align the screw holes
with the wall plugs
Wall Plugs
Screw Holes