Table of Contents
Advertisement
AV-29RF6
Measuring
Item
instrument
Adjustment of
Signal
generator
H.CENTER
Remote
control unit
C
Adjustment
Signal
generator
of
H.SIZE
Remote
control unit
[HORIZONTAL SIZE]
Adjustment of
Signal
generator
EW-PIN
Remote
control unit
28
Test point
Adjustment part
4.H-CENT.
D
5.H-SIZE
ASPECT MODE
H SIZE
6.EW-PIN
Straight
10. Input the circle pattern signal.
11. Select 4.H-CENT and set the initial setting value.
12. Adjust H-CENT to make C=D.
13. Press the OK key and memorize the set value.
14. Input the circle pattern signal.
15. Select 5.H-SIZE and set the initial setting value.
16. Adjust H-SIZE and make sure that the horizontal screen size
of the picture is in the bellow table.
17. Press the OK key and memorize the set value.
REGULAR
ZOOM
92%
85%
18. Select 6.EW-PIN and set the initial setting value
19. Adjust EW-PIN and make the 2nd vertical lines at the left and
right edges of the screen straight. Also make sure that the 3rd
vertical lines are straight.
20. Press the OK key and memorize the set value.
No. 51754
Description
16:9
92%
Advertisement
Table of Contents
