Locking The Device - Empi Continuum User Manual

Product Information (Clinician)
11. Press Home button to accept the change.
12. Press the "TENS" button ( a lock must be visible beside it) to go to the
"In-Progress" screen.
13. Set up patient with electrodes and ramp up the intensity.
Pulsed DC Current (Edema) Parameters
1. Power ON the device by pressing the ON/OFF ( ) button
2. Press top soft key on right to select EDEMA programming.
3. Select Treatment type – Acute or Chronic.
4. Using right side soft keys, scroll parameter value up or down
5. Press the Home button to get back to the Option menu.
6. Press soft key labeled "CONFIG. "
7. Press right side soft key labeled "LOCKS. "
8. Using lower left soft key, scroll to item "EDEMA. "
9. Press the upper right soft key until a locked icon displays.
10. Press Home button to accept the change.
11. Press the "EDEMA" button ( a lock must be visible beside it) to go to the
"In-Progress" screen.
12. Set up patient with electrodes and ramp up the intensity.

Locking the Device

The Empi Continuum has been designed with a feature that allows the
clinician to set up a treatment regimen for each of the three different
stimulation therapy type programs. This feature allows the clinician to be
confident that the treatment instructions are more likely to be followed by
the patient during the course of treatment. After having set up a treatment's
parameters, the clinician can do as follows:
1. On the main options page, press "CONFIG" to get to the CONFIG menu.
2. Press "LOCKS" (Lower Right Soft Key).
3. Using the Left Soft Keys, scroll through available items (NMES L.MUSCLES,
NMES S.MUSCLES, TENS and EDEMA). Initially, these items will show an
unlock icon to the right on the LCD screen.
4. For each item, press the upper right hand soft key once. This will show the
lock icon, an image of a closed pad lock.
5. Press the Home key.
6. Notice the small lock beside the treatment option that was previously
locked. Notice also that when the corresponding soft key is pressed, user
transitions directly to the In-Progress screen.
This can be done for all treatment types.
Continuum User's Manual
33