Xerox Wireless Print Solutions Adapter Installation And Connection Manual page 3

3
At the top of the Quick Setup screen, if needed,
click the menu, then select a language. In a few
seconds, the screen refreshes and displays the
selected language. You may need to log in again.
Note: if the Quick Setup page does not appear,
click the Administration tab, then in the
navigation pane, select Quick Setup.
4
For Bridge 1 (br0) Configuration, select Enabled.
Leave the Bridging MAC Address field blank.
5
Optionally, if your wireless router supports WPS
and it is enabled, you can use WPS. If WPS is
preferred, click the protocol that your router
supports. Options are WPS (PBC) or WPS (PIN). For
details, refer to the documentation for your router.
Proceed to Step 8.
6
From the list of Available Networks, click the
required network's SSID.
7
For Connect To, enter the credentials for the SSID
that you selected.
8
Leave the fields for Printer and Add Printer blank.
Click Submit, then to confirm, click OK.
5
6
English
Français
Italiano
3 Deutsch
Español
Português
Русский
4
7
8
www.xerox.com/office/WPSAsupport