Hummer 2007 H3 Owner's Manual page 404

Hide thumbs Also See for 2007 H3:
Table of Contents

Advertisement

5. Reinstall the center tire cover onto the spare
or flat tire.
6. If your vehicle has a spare tire cover close the
cover and latch the side latch.
404
4. Use the wheel
wrench to tighten
the nuts firmly.
Try to move the tire
back and forth
slightly to be sure it
is secure.
To store the jack tool bag and jack, follow these
procedures:
1. Return the tools to the jack tool bag.
2. Secure the tool bag to the jack by securely
wrapping the straps around the jack. Then,
slide the straps through the rings on the
bag and secure.
3. Position the jack and jack tool bag in the
swing-gate.
When reinstalling the jack and jack tool bag,
make sure the jack base is securely seated
behind the tabs in the swing-gate.

Advertisement

Table of Contents
loading

This manual is also suitable for:

H3

Table of Contents