Spare Tire - Hummer 2003 H2 Owner's Manual

Hide thumbs Also See for 2003 H2:

Table of Contents

Removing the Flat Tire and Installing the

Spare Tire

1. To remove the center

cap, place the flat end of

the wheel wrench in the

slot on the wheel and

gently pry the center

2. Slide the ratchet onto the wheel wrench with the

DOWN mark facing you.

3. Turn the ratchet counterclockwise to loosen the

wheel nuts. Don't remove them yet.

You will now need to jack the vehicle up using the

instructions following.

Table of Contents