Removing The Flat Tire And Installing The Spare Tire - Hummer H2 2004 Owner's Manual

Hide thumbs Also See for H2 2004:

Table of Contents

Removing the Flat Tire and Installing

the Spare Tire

1. To remove the center

cap, place the ﬂat end

of the wheel wrench

in the slot on the wheel

and gently pry the

center cap out.

2. Slide the ratchet onto the wheel wrench with the

DOWN mark facing you.

3. Turn the ratchet counterclockwise to loosen the

wheel nuts. Don't remove them yet.

You will now need to jack the vehicle up using the

instructions following.

4. Assemble the jack and tools as follows:

Front Flat Tire: Attach the jack handle (E) with the

hook end connected to the u-hook/clevis on the

jack (A). Slide the ratchet (F) onto the jack

handle (E) with the UP mark facing you.

Chapters

Table of Contents