Turn Signal/Multifunction Lever; Turn And Lane-Change Signals - GMC 2010 Canyon Crew Cab Owner's Manual

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:
G : Turn and Lane Change Signals
5 3 : Headlamp High/Low-Beam Changer
N : Windshield Wipers
L
: Windshield Washer
J
: Cruise Control
Flash-to-Pass.
Information for these features is on the pages following.
4-4

Turn and Lane-Change Signals

Move the lever all the way up or down to signal a turn.
Raise or lower the lever until the arrow starts to flash
to signal a lane change. Hold it there until the lane
change is complete.
The lever returns to its starting position when it is
released.
If after signaling a turn or a lane change the arrows
flash rapidly or do not come on, a signal bulb may be
burned out.
Have the bulbs replaced. If the bulb is not burned out,
check the fuse. For bulb replacement, see Taillamps,
Turn Signal, Stoplamps and Back-up Lamps on
page 6-53. For a blown fuse or circuit breaker,
see Fuses and Circuit Breakers on page 6-111.
An arrow on the instrument
panel cluster flashes in the
direction of the turn or
lane change.