Universal Remote System Operation - GMC 2010 Acadia Owner's Manual

Hide thumbs Also See for 2010 Acadia:

Table of Contents

Instruments and Controls

Universal Remote System

Using Universal Remote

Press and hold the appropriate

Universal Remote button for at least

half of a second. The indicator light

will come on while the signal is

being transmitted.

Erasing Universal Remote

All programmed buttons should be

erased when the vehicle is sold or

the lease ends.

To erase all programmed buttons on

the Universal Remote device:

1. Press and hold down the

two outside buttons until the

indicator light begins to flash,

after 20 seconds.

2. Release both buttons.

Reprogramming a Single

Universal Remote Button

To reprogram any of the three

Universal Remote buttons, repeat

the programming instructions earlier

in this section, beginning with

For help or information on the

Universal Home Remote System,

call the customer assistance phone

number under