Vehicle Personalization - GMC 2005 Yukon Owner's Manual

Vehicle Personalization

Memory Seat
These buttons are used to program and recall memory
settings for the driver's seat, throttle and brake
pedals and both the driver's and passenger's outside
mirrors. The settings for these features can be saved for
up to two drivers.
If your vehicle has this
feature, the controls for
the memory function are
located on the driver's door.
To store the settings, do the following:
1. While the vehicle is in PARK (P), adjust the driver's
seat, including the seatback recliner, lumbar, and
side wing area, throttle and brake pedals and
both of the outside mirrors to your preference.
2. Press and hold the 1 or 2 button of the memory
control for three seconds. A double chime will
sound to let you know that the position has been
stored.
To repeat the procedure for a second driver, follow the
preceding steps, but press the other numbered
memory control button.
Each time button 1 or 2 is pressed and released while
the vehicle is in PARK (P), a single chime will sound and
the memory position will be recalled.
To stop recall movement of the memory seat feature at
any time, press one of the memory buttons or power
seat controls.
2-61