Assembly
1
Check that the control knob
(M) for the gas supply system is
tumed to the OFF position before
starting any assembly.
2
Attach the Rear side panel (D) and
door panel (G) to the table top
(B), using four M6x20 screws (2),
four eight washers (5), four screw
caps (1).
3
Attach the right side panel (C) to the
door panel (G) and rear side panel
(D), using four M6x40 screws (4),
four eight washers (5), four screw
caps (1).
B
M
D
G
B
D
C
G
5
4
1
1
2
5