Table of Contents
Advertisement
Assembly
7
Assemble the Glass Screen
Attach the glass (R) and glass (Q)
to the eight fixture parts (P), using
sixteen screws (6). Do not over
tighten.
8
Connect the gas hose and regulator, then
connect the regulator to the gas cylinder.
WARNING! Ensure the hose does not
contact any high temperature surfaces, or
it may melt and leak causing a fire.
After the cylinder is placed inside the
heater, secure the cylinder with block belt
tightly.
9
Turn the cylinder valve on the tank
clockwise to close the propane
tank. Attach the preassembled
regulator from the table top (B) to
the cylinder valve by turning the
regulator coupling nut clockwise.
Make sure it is fastened securely
and tighten connections by
hand only.
P
6
Q
R
A
Please note that
the assembly
position of glass
must be same as
6
the right pucture
showing.
P
B
Advertisement
Table of Contents
