Advertisement
Open the cap labeled WASHER FLUID ONLY with
the washer symbol
on
it. Add washer fluid until the
tank
is full.
NOTICE:
0
a
a
0
When using concentrated washer fluid,
follow the manufacturer's instructions
for
adding water.
Don't mix water with ready-to-use washer
fluid. Water can cause the solution to freeze
and damage
your
washer fluid tank and
other parts of the washer system. Also,
water doesn't clean as well as washer fluid.
Fill your washer fluid tank only
three-quarters full when it's very cold. This
allows for expansion if freezing occurs,
which could damage the tank if it is
completely full.
Don't use engine coolant (antifreeze) in
your windshield washer. It can damage
your washer system and paint.
Brakes
Brake Fluid
Your brake master cylinder reservoir is here. It is filled
with DOT-3 brake fluid.
There are only two reasons why the brake fluid level
in
the
reservoir might go down. The first is that the brake fluid
goes down to an acceptable level during nolmal brake
lining wear. When new linings are put in, the fluid level
of the brake system. If
it is,
you should have your brake
L
goes back up. The other reason is that fluid
is
leaking out
6-30
Advertisement
