Yamaha R7 Owner's Manual page 62

Periodic maintenance and adjustment
1 2
1. Engine oil drain bolt
2. Gasket
TIP
Skip steps 6–8 if the oil filter cartridge
7
is not being replaced.
6. Remove the oil filter cartridge with
an oil filter wrench.
1 1 1
1. Oil filter wrench
2. Oil filter cartridge
TIP
An oil filter wrench is available at a
Yamaha dealer.
7. Apply a thin coat of clean engine
oil to the O-ring of the new oil filter
cartridge.
1. O-ring
TIP
Make sure that the O-ring is properly
2 2
seated.
8. Install the new oil filter cartridge
with an oil filter wrench, and then
tighten it to the specified torque
with a torque wrench.
1. Torque wrench
9. Install the engine oil drain bolt and
10. Refill with the specified amount of
7-12
1 1 1
Tightening torque:
Oil filter cartridge:
17 N·m (1.7 kgf·m, 13 lb·ft)
its new gasket, and then tighten
the bolt to the specified torque.
Tightening torque:
Engine oil drain bolt:
43 N·m (4.3 kgf·m, 32 lb·ft)
the recommended engine oil.