HP ProLiant ML110 Operating System Installation Manual page 23

8. Press Enter to continue.
9. Modify or accept the server settings, the regional settings, and the mouse and video
configuration.
Phase 2 - Installing the HP Drivers
The installation program then detects your hardware and attempts to match the drivers to the
hardware. It displays a Driver names summary screen.
1. If you have an IDE system, press Enter to continue.
If you have a SCSI model, you need to install the HP SCSI driver (the SCSI driver
proposed by default by NetWare does not install properly):
a. Scroll down to choose Modify and press Enter.
b. Scroll down to highlight the Storage Adapters item and press Enter.
c. Press Delete to remove the default SCSI driver.
d. Insert the HP disk NW SCSI diskette you created earlier in the floppy drive.
e. Click Insert to add a driver, and then click Insert again to add an unlisted driver.
f.
NOTE: The new HP driver may show the same device name description, however it is an updated
version.
g. Scroll down and select Return to driver summary.
h. Scroll down and select Continue.
2. The next Driver names summary screen displays storage and network devices. You need
to manually install the HP LAN driver:
a. Scroll down to choose Modify and press Enter.
b. Scroll down to highlight the Network boards item and press Enter.
c. Insert the HP disk NW LAN diskette you created earlier in the floppy drive.
d. Click Insert to add a driver, and then click Insert again to add an unlisted driver.
e. Press F3 and specify the path: A: then press Enter.
HP ProLiant ML110 Server Network Operating System Installation Guide
The installation program displays the drivers detected: a SCSI driver and a generic
ATA/IDE/ATAPI Adapter driver (IDEATA.HAM).
The only remaining driver should be the IDEATA.HAM driver.
CAUTION: Do NOT remove the IDEATA driver because it is used by the CD-ROM drive.
Press F3 and specify the path: A: then press Enter.
The installation program will scan the floppy drive for compatible drivers and then
automatically add the HP SCSI driver to the driver list.
The installation program will scan the floppy drive and then automatically add the
HP LAN driver to the driver list.
Installing Novell NetWare 5.1
3-3