Replacing High-Mount Brake Lamp Bulbs; Replacing License Plate Lamp Bulbs; Replacing Foglamp Bulbs - Ford 2005 Freestyle Owner's Manual

Lights

Replacing high-mount brake lamp bulbs

1. Make sure the ignition control is
in the OFF position.
2. Remove the two screws.
3. Unclip the bulb holder from the
reflector.
4. Pull the bulb straight out.
Install in reverse order.

Replacing license plate lamp bulbs

1. Make sure the headlamp switch is
in the OFF position.
2. Remove the screw from the
license plate lamp assembly and pull
it down.
3. Remove bulb socket by turning
counterclockwise.
4. Carefully pull the bulb out from
the socket.
Install new bulb(s) in reverse order.

Replacing foglamp bulbs

1. Make sure the foglamp switch is
in the OFF position.
2. Remove the bulb socket from the
foglamp by turning
counterclockwise.
3. Disconnect the electrical
connector.
Install the new bulb in reverse order.
60
2005 Freestyle (219)
Owners Guide (post-2002-fmt)
USA (fus)