Page 1
KP1200 elite 2D Barcode Scanner User Manual KP1200 User Manual Version 1.0-EN www.kaptur-id.com...
Page 2
This page has been intentionally left blank 2 of 93 KP1200 User Manual Version 1.00-EN...
Page 3
The device is manufactured by Trovi Technology CO., LTD. Kaptur brand, logos and Kaptur slogans are proprietary of Trovi Technology CO., LTD. and TechSigno srl While the information found in this manual has been accurately verified, Trovi Technology assumes no liability for errors that may be herein contained or for damage to property or persons resulting from an improper use of the same or the software derived from it.
Page 4
Safety information Carefully read the general information regarding safety before using the device for the first time. An improper use of the device could damage the device or cause harm to both people and things. CE certification The device conforms to European Directive 1999/5/EC. Disposal (RAEE) The barred mobile container present on the product, the documentation or the packaging indicates the necessity, within the European Union, of a separate collection for expired electric and electronic products, including...
Index Index ................................. 5 1 Specifications ............................7 1-1 Technical specifications ........................7 1-2 Default setting for each barcode ..................... 8 2 Get started ............................. 9 2-1 Dimensions ............................9 2-2 Parts of the scanner ........................9 2-4 Installation and uninstallation of cable ................... 10 2-4-1 Installation - USB ........................
Page 6
3-27 UK/Plessey ..........................62 3-28 China Post ........................... 63 3-29 China Finance ..........................64 3-30 GS1 DataBar (GS1 DataBar Truncated) ..................66 3-31 GS1 DataBar Limited ........................67 3-32 GS1 DataBar Expanded ......................68 3-33 PDF417 ............................69 3-34 QR Code ............................. 70 3-35 Data Matrix ..........................
1 Specifications 1-1 Technical specifications Dimensions Height × Width × Depth:90 mm × 62.8 mm × 153 mm 132g, without cable Weight Straight 2.0 m Cable Connector Type RJ-45 phone jack connector Case Material PC+TPU Exit Window Material Tempered glass Indicator Beeper, LED Interface Supported...
2 Get started 2-1 Dimensions Stand is an optional 2-2 Parts of the scanner Figure 2-1 ① LED ② Beeper ③ Scan window ④ Trigger ⑤ Release-hole of the cable ⑥ Cable interface port KP1200 User Manual Version 1.00-EN 9 of 93...
2-4 Installation and uninstallation of cable 2-4-1 Installation - USB The scanner attaches directly to a USB host, and is powered by it. No additional power supply is required. Refer to Figure 2-3, connect the USB interface cable to the bottom of the scanner. Plug the series A connector in the USB host, or an available port of the terminal.
Page 11
2-4 Assembling the Stand Note: The stand is an optional accessory KP1200 User Manual Version 1.00-EN 11 of 93...
3 Programming 3-1 Example 1: Single-parameter setting by scanning 1D barcodes Important notes: 1. During the process of programming, LED is lighting to indicate the programming correctness. LED will go off if any incorrect programming operation performed. 2. After each successful programming, LED will go off and the scanner will beep twice. 3.
3-2 Example 2: Multiple-parameter setting by scanning a QR code barcode User can customize a QR code to set multiple parameters. The scanner can set multiple parameters by scanning this single QR code barcode. 1. The data format of the QR code barcode is as following. Parameter set 1 Parameter set 2 Parameter set N...
3-3 Operate the scanner by receiving command via UART Note: 1- The information in this chapter is provided for the scanner with RS232 cable or USB cable. 2- If the scanner is with USB cable, the setting of USB device type must be set as “USB virtual COM”. Please refer to USB interface.
3-5 RS-232 interface Host type: Standard- The scanner is connected to a standard RS-232 interface. OPOS/JPOS- The scanner is connected to a POS terminal which may be necessary to install the OPOS/JPOS driver to be compatible with the manufacturer's scanner. The OPOS/JPOS driver is provided by the scanner manufacturer;...
Page 16
Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Standard Host type OPOS/JPOS None RTS/CTS (Host idle: Low RTS) Flow control RTS/CTS (Host idle: High RTS) XON/XOFF ACK/NAK 0 ms 5 ms 10 ms Inter-character delay 20 ms 40 ms 80 ms 00-99 Response delay...
Page 17
Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry 38400 57600 115200 None Parity bit Even 8 bits Data bit 7 bits One bit Stop bit Two bits KP1200 User Manual Version 1.00-EN 17 of 93...
3-6 USB interface USB device type: HID keyboard – By setting, the scanner is used as a USB HID keyboard emulation device. HID keyboard for Apple Mac – By setting, the scanner is compatible with Apple Mac. USB virtual COM – By setting, the scanner emulates a regular RS232-based COM port. If a Microsoft Windows PC is connected to the scanner, a driver is required to install on the connected PC.
Page 19
Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry HID keyboard HID keyboard for Apple Mac USB device type USB virtual COM Simple COM Port Emulation HID for OPOS/JPOS Turkish F Turkish Q French Italian Spanish Keyboard layout Slovak Denmark Japanese German Belgian...
Page 20
Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry 20 ms 40 ms 60 ms Alphabetic key Numeric key Numeric keypad Alt + keypad 20 of 93 KP1200 User Manual Version 1.00-EN...
3-7 Scan mode & some global settings Scan mode: Good-read off- The trigger button must be pressed once to activate scanning. The light source of scanner stops scanning when there is a successful reading, or no code is decoded after the Stand-by duration elapsed.
Page 22
Global Max./Min. code length for 1D symbol: These two lengths are defined as the valid range of decoded 1D barcode data length. Make sure that the minimum length setting is no greater than the maximum length setting, or otherwise the labels of the symbol will not be readable. In particular, the same value can be set for both minimum and maximum reading length to force the fixed length barcode decoded.
Page 23
Complete data output before next decode attempt: This setting is active only when USB device type is USB interface set as “HID keyboard” or “HID keyboard for Apple Mac”, refer to . If it is enabled, the scanner will not start next decode attempt until previous data output is completed. Sleep mode: If it is enabled, the scanner will go to sleep when no code is successful decoded after the Sleep mode delay elapsed.
Page 25
Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry 1 hour 00-FF Same barcode delay time for 1D symbol 00-FF (50 ms) 00-FF Same barcode delay time for 2D symbol 00-FF (50 ms) 00-09 Double confirm 00-09 (00: no ) Global max.
Page 26
Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Data output delay in continue- 00-FF 00-99 (100 ms) scan mode FF (Never) ASCII Character encoding system UTF-8 Windows-1251 Complete data output before Disable next decode attempt Enable Sleep mode Disable Enable 1 second 5 seconds...
3-8 Indication Power on alert: After power-on the scanner will generate an alert signal to indicate a successful self-test. LED indication: After each successful reading, the LED above the scanner will light up to indicate a good barcode reading. Beeper indication: After each successful reading, the scanner will beep to indicate a good barcode reading, and its beep tone duration is adjustable.
3-9 Decode illumination and decode aiming pattern Decode illumination mode: Enable illumination causes the scanner to turn on the illumination to aid decoding. Disable illumination to turn off illumination for the scanner during decoding. Better quality images could be obtained with illumination support. The effectiveness of the illumination decreases as the distance to the target increases.
Page 29
Multiple-scan setting Single-scan setting Option barcode Option Alpha. Entry Always Off Always On Decode illumination mode Flashing Always On when reading Always Off Always On Decode aiming pattern On before reading On when reading Disable decode illumination Level of decode illumination Middle High Always off...
3-10 Other settings 1D symbols read: A global setting of 1D symbols readability. 2D symbols read: A global setting of 2D symbols readability. Vertical centering read: By setting Enable, the scanner reads only the barcode centered by the aimer in vertical direction.
Page 31
Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Follow respective 1D 1D symbols read symbol setting All 1D OFF Follow respective 2D symbol setting All 2D OFF All 2D ON Only PDF417 ON 2D symbols read Only QR code ON Only Data Matrix ON Only MaxiCode ON Only Aztec Code ON...
Page 32
Note: The instruction of calibrating the aimer in vertical centering direction. Scan the barcode on this page. The scanner will give three musical short beeps to indicate entering calibration mode. Press the trigger of the scanner while maintaining the distance of about 15cm between the scan window of the scanner and this paper.
3-11 UPC-A Read: Format System character Data digits (10 digits) Check digit Check digit verification: The check digit is optional. Check digit trans.: By setting Enable, check digit will be transmitted. Code ID setting: Code ID is a one-or-two-character string used to represent the symbol upon a succeeding reading.
3-12 UPC-E Read: Format System character “0” Data digits (6 digits) Check digit Check digit verification: The check digit is optional and made as the sum of the numerical value of the data digits. Check digit trans.: By setting Enable, check digit will be transmitted. UPC-A Code ID setting: Refer to Code ID setting of UPC-A...
3-13 UPC-E1 Read: Format System character “1” Data digits (5 digits) Check digit Check digit verification: The check digit is optional and made as the sum of the numerical value of the data digits. Check digit trans.: By setting Enable, check digit will be transmitted. UPC-A Code ID setting: Refer to Code ID setting of UPC-A...
3-14 EAN-13 (ISBN/ISSN) Read: Format Data digits (12 digits) Check digit Check digit verification: The check digit is optional and made as the sum of the numerical value of the data digits. Check digit transmission: By setting Enable, check digit will be transmitted. UPC-A EAN-13 code ID setting: Refer to Code ID setting of UPC-A...
3-15 EAN-8 Read: Format Data digits (7 digits) Check digit Check digit verification: The check digit is optional and made as the sum of the numerical value of the data digits. Check digit trans.: By setting Enable, check digit will be transmitted. UPC-A Code ID setting: Refer to Code ID setting of UPC-A...
3-16 Code 39 (Code 32, Trioptic Code 39) Read: Format Start character (*) Data digits (variable) Check digit (optional) End character (*) Check digit verification: The check digit is optional and made as the sum module 43 of the numerical value of the data digits.
3-17 Interleaved 2 of 5 Read: Format Data digits (Variable) Check digit (optional) Check digit verification: The check digit is made as the sum module 10 of the numerical values of all data digits. There are two optional check digit algorithms: the specified Uniform Symbol Specification (USS) and the Optical Product Code Council (OPCC).
3-18 Industrial 2 of 5 (Discrete 2 of 5) Read: Format Data digits (variable) Code 39 Max./Min. code length: Refer to Max./Min. code length of UPC-A Code ID setting: Refer to Code ID setting of UPC-A Insertion group selection: Refer to Insertion group selection of Multiple-scan setting Single-scan setting Option barcode...
3-19 Matrix 2 of 5 Read: Format Data digits (variable) Check digit (optional) Check digit verification: The check digit is made as the sum module 10 of the numerical values of all data digits. Check digit transmission: By setting Enable, check digit will be transmitted. Code 39 Max./Min.
3-20 Codabar Read: Format Start Data digits (variable) Check digit (optional) Check digit verification: The check digit is made as the sum module 16 of the numerical values of all data digits. Check digit transmission: By setting Enable, check digit will be transmitted. Code 39 Max./Min.
Page 51
Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry 00-44 Insert group selection 00-44 ABCD/ABCD abcd/abcd Start/End type ABCD/TN*E abcd/tn*e Disable Start/End transmission Enable Disable Start/End character equality Enable KP1200 User Manual Version 1.00-EN 51 of 93...
3-21 Code 128 Read: Format Data digits (variable) Check digit (optional) Check digit verification: The check digit is made as the sum module 103 of all data digits. Check digit transmission: By setting Enable, check digit will be transmitted. Code 39 Max./Min.
3-22 UCC/EAN 128 Read: Format Data digits (variable) Check digit (optional) Check digit verification: The check digit is made as the sum module 103 of all data digits. Check digit transmission: By setting Enable, check digit will be transmitted. Code 39 Max.
3-23 ISBT 128 Read: Format “=” or “&” Data digits (variable) Check digit (optional) Check digit verification: The check digit is made as the sum module 103 of all data digits. Check digit transmission: By setting Enable, check digit will be transmitted. Code 39 Max./Min.
3-24 Code 93 Read: Format Data digits (variable) 2 check digits (optional) Check digit verification: The check digit is made as the sum module 47 of the numerical values of all data digits. Check digit transmission: By setting Enable, check digit will be transmitted. Code 39 Max./Min.
3-25 Code 11 Read: Format Check digit 1 Data digits (variable) Check digit 2 (optional) (optional ) Check digit verification: The check digit is presented as the sum module 11 of all data digits. Check digit transmission: By setting Enable, check digit 1 and check digit 2 will be transmitted upon your selected check digit verification method.
3-26 MSI/Plessey Read: Format Data digits (variable) Check digit 1 (optional) Check digit 2 (optional) Check digit verification: The MSI/Plessey has one or two optional check digits. There are three methods of verifying check digits, i.e. Mod 10, Mod 10/10 and Mod 10/11. The check digit 1 and check digit 2 will be calculated as the sum module 10 or 11 of the data digits.
3-27 UK/Plessey Read: Format Data digits (variable) 2 check digits (optional) Check digit verification: The UK/Plessey has one or two optional check digits. The check digit 1 and check digit 2 will be calculated as the sum module 10 or 11 of the data digits. Check digit transmission: By setting Enable, check digit will be transmitted.
3-28 China Post Read: Format 11 Data digits Code 39 Max. /Min. code length: Refer to Max./Min. code length of . The code length of China Post is 11. UPC-A Code ID setting: Refer to Code ID setting of UPC-A Insertion group selection: Refer to Insertion group selection of Multiple-scan setting Single-scan setting...
3-29 China Finance Note: This type of barcode is not Omni-directionally decodable. The encodable character set includes numeric 0 to 9. Among the symbol of 0 to 9, 0 and 2, 4 and 9, 5 and 8, 6 and 7, have the symmetrical pattern;...
Page 65
Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Only 7 converted to C Only 8 converted to D Only 9 converted to E Disable Assigned to 0 Assigned to 5 (A) Assigned to 6 (B) Assigned to 7 (C) Leading character assignment Assigned to 8 (D) Assigned to 9 (E)
3-30 GS1 DataBar (GS1 DataBar Truncated) GS1 DataBar Truncated is structured and encoded the same as the standard GS1 DataBar format, except its height is reduced to 13 modules minimum; while GS1 DataBar should have a height greater than or equal to 33 modules.
3-31 GS1 DataBar Limited Read: Format 16 Data digits UPC-A Code ID setting: Refer to Code ID setting of UPC-A Insertion group selection: Refer to Insertion group selection of GS1 DataBar (GS1 DataBar Truncated) Conversion: Refer to Conversion of Multiple-scan setting Single-scan setting Option barcode Option...
3-32 GS1 DataBar Expanded Read: Format Data characters (variable) UPC-A Code ID setting: Refer to Code ID setting of UPC-A Insertion group selection: Refer to Insertion group selection of Conversion: String transmission UCC/EAN 128- Refer to Code ID transmission of , ]Cm will be identified as AIM ID.
3-34 QR Code Read: Format Data characters (variable) Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable 70 of 93 KP1200 User Manual Version 1.00-EN...
3-35 Data Matrix Read: Format Data characters (variable) Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable KP1200 User Manual Version 1.00-EN 71 of 93...
3-36 Han Xin Code Note: The support for this feature is available with customized firmware version. Read: Format Data digits (variable) Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable 72 of 93 KP1200 User Manual Version 1.00-EN...
3-38 MicroQR Code Note: The support for this feature is available with customized firmware version. Read: Format Data digits (variable) Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry Disable Read Enable 74 of 93 KP1200 User Manual Version 1.00-EN...
3-39 G1-G6 & C1-C3 & FN1 substitution string setting Format of barcode data transmission: Prefix Code name Preamble Code ID Code length Code data Code ID Postamble Suffix Suffix string setting: The <enter > key is represented in different ASCII when it is applied by different OS. For a Windows/DOS OS, <enter>...
Page 76
Steps: 1) Scan the option barcode of Insert G1 string setting. 2) Use the ASCII table to find the value of A→41, B→42. 3) Scan 4, 1 and 4, 2 from the barcode on the last page. 4) Scan END barcode. G1-G4 string position &...
Page 77
FN1 substitution string setting: The FN1 character (0x1D) in an UCC/EAN128 barcode, or a Code 128 barcode, or a GS1 DataBar barcode can be substituted with a defined string. Truncate leading G5 string setting: By setting, a defined leading character or string can be truncated. Also, a single character can be un-defined.
Page 78
Truncate ending G6 string setting: By setting, a defined ending character or string can be truncated. Also, a single character can be un-defined. Repeat of a G6 character setting: While G5 is set as a single defined/un-defined character, G6 can also be set to be repeated.
Page 79
Multiple characters C3 replacement: By setting, a number of defined characters in the data string can be replaced by other defined characters. The maximum number of characters to replace is 11. Example: Replace all the “A” character in a data string with “B” character; replace “C” with “D”; replace “E”...
Page 81
Multiple-scan setting Single-scan setting Option barcode Option Alpha. Entry Once Repeat of a G5 character setting Defined times 01-22 Un-defined times (All) A un-defined character Truncate ending G6 string setting 1-22 defined characters 01-7F <0> Once Repeat of a G6 character setting Defined times 01-22 Un-defined times (All)
3-40 G1-G4 string position & Code ID position Format of barcode data transmission: Prefix Code name Preamble Code ID Code length Code data Code ID Postamble Suffix Insert G1/G2/G3/G4 string position: The scanner offers 4 positions to insert strings among the symbol. In case of the insertion position is greater than the length of the symbol, the insertion of string is not effective.
3-41 String transmission Note: The information in this chapter is closely related to the chapter of String setting. Format of barcode data transmission: Prefix Code name Preamble Code ID Code length Code data Code ID Postamble Suffix Prefix transmission: By setting Enable, prefix will be appended before the data transmitted. Suffix transmission: By setting Enable, suffix will be appended after the data is transmitted.
Page 85
Multiple-scan setting Single-scan setting Option barcode Option Alpha. entry RS-232 USB/RS-232 All-non-printable-character string Disable transmission with string setting Enable Transmit the first N data characters only 01-99 Transmit the last N data characters only 01-99 KP1200 User Manual Version 1.00-EN 85 of 93...
4 Maintenance Cleaning the scan window is the only maintenance required. A dirty window may affect scanning accuracy. Do not allow any abrasive material to touch the window. Remove any dirt particles with a damp cloth. Wipe the window using a tissue moistened with water. Do not spray water or other cleaning liquids directly into the window.
5 Barcode representing non-printable character Notes to make the following barcode: 1. According to different barcode printing software, the method of printing following barcode is different. 2. If using CODESOFT software, firstly read the information through “Help→Index→Code128→Special input syntax”. Also refer to ASCII table. For example, if we wish to make “F1” barcode, select “Code128”, then select “CODE A”...
6 ASCII Table for keyboard wedge for RS-232 Null Down Left Right PgUp PgDn Home Enter Insert Ctrl+ Delete Alt+ Notes: The 2nd and the 3rd columns above are used for keyboard wedge only. “ & ‘ < > Example: ASCII “A” = “41”. 88 of 93 KP1200 User Manual Version 1.00-EN...
8 Return default parameters & list firmware version WARNING: Default value initialization If you wish to return the scanner to all the factory default settings, scan the barcode above. Firmware version list If you wish to display the firmware version, scan the barcode above.