Ford 2002 Crown Victoria Manual page 57

Climate Controls
Turning the EATC on
Press AUTOMATIC, any of the
HI
override controls or the fan speed OFF
F
AUTO
control. The EATC will only operate
OUTSIDE TEMP AUTOMATIC
when the vehicle is running.
MAX A/C NORM A/C VENT FLOOR FLR • DEF DEF
LO
Turning the EATC system off
Press OFF. The outside temperature
function will continue to operate
HI
OFF
until the ignition is turned off.
AUTOMATIC
FLR • DEF DEF
LO
Automatic operation
Press AUTOMATIC and select the desired temperature. The selected
temperature and the word AUTO will appear in the display window. The
EATC system will either heat or cool to achieve the selected
temperature. The system will automatically determine fan speed, airflow
location and if outside air or recirculated air is required. Fan speed
remains automatic unless the fan speed thumbwheel is turned or the
steering wheel fan speed control (if equipped) is pressed.
When in AUTOMATIC and weather conditions require heat, air will be
sent to the floor. However, if the engine is not warm enough to provide
heat, the fan will be at a low speed and the air will be directed to the
windshield. In approximately 3 ⁄ minutes or less, the fan speed will start
1
2
to increase and the airflow location will change to the floor area.
If unusual conditions exist (i.e.-window fogging, etc.), the manual
override controls allow you to select airflow locations and the fan control
allows you to adjust fan speed as necessary.
57