Kenwood DNX997XR Instruction Manual page 140

Getting Started
WARNING
See the Safety Precautions and Important
Information in the KENWOOD system
instruction manual for product warnings and
other important information.
NOTE: The screenshots shown in this
manual may not exactly match the screens
on your navigation system. The images
used in this manual are intended for
reference only.
Navigation System
For complete audio system information, see
the KENWOOD system instruction manual.
Opens the navigation system when selected.
Status Bar Icons
The status bar is at the top of the main
menu. The status bar icons display
information about features on the device.
You can select some icons to change
settings or view additional information.
GNSS signal status
Current time
INRIX Traffic Service status
Using the On-Screen Buttons
• Select to return to the previous menu
screen.
• Hold to quickly return to the main
menu.
• Select or to see more choices.
• Hold or to scroll faster.
• Select to see a menu of options for
the current screen.
Getting Started
Removing a Shortcut
1
Select Where To? >
Shortcut(s).
2
Select a shortcut to remove.
3
Select the shortcut again to confirm.
4
Select Save.
Adding a Shortcut
You can add shortcuts to the Where To?
menu. A shortcut can point to a location, a
category, or a search tool.
The Where To? menu can contain up to 36
shortcut icons.
1
Select Where To? > Add Shortcut.
2
Select an item.
Using Multi-touch Controls
You can use multi-touch controls to change
the map view while using the navigation
map.
NOTE: This feature is not available on all
models.
• Pinch two fingers together on the screen
to zoom out.
• Spread two fingers on the screen to
zoom in.
Updating the Software
Before you can update the navigation
system software, you must have a USB
mass storage device and an internet
connection.
1
Go to http://www.kenwood.com/cs/ce
/firmware/.
2
Enter the model name for your device.
Updating Map Data
You can purchase updated map data from
Garmin .
®
1
Go to www.garmin.com/kenwood.
2
From the Map Updates section, select
Update.
3
Follow the on-screen instructions.
After you update map data for the first time,
you can use an SD card and the Garmin
Express ™ application to perform future map
updates.
> Remove
1