Download Print this page
TP-Link TL-FC111PB-20 Installation Instructions
TP-Link TL-FC111PB-20 Installation Instructions

TP-Link TL-FC111PB-20 Installation Instructions

10/100mbps wdm media converter with 1-port poe

Advertisement

Quick Links

Enlarge Your Ethernet Network
10/100Mbps WDM Media Converter with 1-Port PoE
Package Contents: Converter, Power Adapter, Installation Guide
Scenario 1: Connect Devices with Optical Interfaces
Ethernet Device
with Optical Interfaces
Note: The PoE Media Converter supplies steady power and data connectivity to a powered device such as PoE IP Camera and PoE AP through an Ethernet cable.
100BASE-X (Fiber) Interface
LC-SC Fiber Cable
LED Explanation
PWR
On:
Power on
Off:
Power off
PoE
On:
Supplying power normally
Flashing Slowly:
No PD is connected
Flashing Quickly:
Supplying power abnormally
Off:
No power supply
Media Converter
PWR
PoE
Fast Ethernet
Link/Act
On:
Valid link
Flashing:
Transmitting or receiving data
Off:
Invalid link
Powered Device (PD)
IP Camera
Twisted-Pair Cable
AP

Advertisement

loading

Summary of Contents for TP-Link TL-FC111PB-20

  • Page 1 LED Explanation Link/Act Power on Valid link Off: Power off Flashing: Transmitting or receiving data Enlarge Your Ethernet Network Off: Invalid link 10/100Mbps WDM Media Converter with 1-Port PoE Supplying power normally Flashing Slowly: No PD is connected Flashing Quickly: Supplying power abnormally Off: No power supply...
  • Page 2 Do not use any other chargers than those recommended. TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, Adapter shall be installed near the equipment and shall be easily accessible.
  • Page 3 請不要私自拆開機殼或自行維修, 如產品有故障請與原廠或代理商聯繫。 We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the 此為甲類資訊技術設備, 于居住環境中使用時, 可能會造成射頻擾動, 在此種情況下, 使用者會被要求採取某些適當的 applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.