Advertisement
Scenario 2: Connect Devices without Optical Interfaces
Ethernet Device
without Optical Interfaces
Specifications
General Specifications
Standards
IEEE 802.3, IEEE 802.3i, IEEE802.3u, IEEE802.3af
LED
PWR, Link/Act, PoE
Connector
1 SC fiber optic; 1 RJ45 jack
10BASE-T: 2-pair UTP/STP of Cat. 3 or above (≤100 m)
100BASE-TX: 2-pair UTP/STP of Cat. 5 or above (≤100 m)
Twisted-Pair
100BASE-BX10: SMF
Fiber
9/125 μm single-mode fiber
Transmission Distance
≤20 km
Wavelength
1310 nm TX, 1550 nm RX
PoE
802.3af; up to 15.4 W for the PoE port
Power
External Power Adapter: 48 V/0.5 A
Dimensions
94.5*73*27 mm
EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU,
2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.
Media Converter
Fast Ethernet
Twisted-Pair Cable
Media Converter
PWR
PoE
10/100M
SC-SC Fiber Cable
Environmental and Physical Specifications
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
To ask questions, find answers, and communicate with TP-Link users or
engineers, please visit https://community.tp-link.com to join TP-Link
Community.
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.
If you have any suggestions or needs on the product guides, welcome to email
techwriter@tp-link.com.cn.
Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
Do not point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight
Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't
hesitate to contact us.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due
to improper use of the device. Please use this product with care and operate at your own risk.
Powered Device (PD)
Fast Ethernet
IP Camera
Twisted-Pair Cable
0˚C to 50˚C (32˚F to 122˚F)
-40˚C to 70˚C (-40˚F to 158˚F)
10% to 90% RH non-condensing
5% to 90% RH non-condensing
AP
Advertisement
