3.7 Peripheral Setup
1. Press <ENTER> on "Peripheral Setup" of the main menu screen.
(C) 1998 American Megatrends, Inc. All Rights Reserved
Onboard Network Device
Onboard SCSI Device
U/2 LVD Terminator Config
U/W Terminator Auto Config
U/W High-Byte Terminator
U/W Low-Byte Terminator
OnBoard FDC
OnBoard Serial PortA
OnBoard Serial PortB
IR I/O Pin Location Select
Serial Port Mode
IR Duplex Mode
IrDA Protocol
OnBoard Parallel Port
Parallel Port Mode
EPP Version
Parallel Port IRQ
Parallel Port DMA Channel
Onboard IDE
2. Use <Up> and <Down> to choose the item and <PgUp> and
<PgDn> keys to modify the highlighted item.
3. After you have finished with the Peripheral Setup, press <ESC> to
go back to the main menu.
AMIBIOS SETUP - PERIPHERAL SETUP
Enabled
Enabled
Reserved
Enabled
Enabled
Enabled
Auto
Auto
Auto
SINB/SOUTB
Normal
Half
1.6 us
Auto
Normal
ECP
Auto
3
Both
3-24
®
Available Options:
Auto
Disabled
Enabled
ESC:Exit :Sel
PgUp/PgDn:Modify
F2/F3:Color