Table of Contents
Advertisement
Oct.2001
ERROR MESSAGES
Sampling related
Memory Full!
Sampling is not possible because there is no space in
user memory.
>Delete unneeded sample data.
Ran out of user memory during sampling.
>Delete unneeded sample data.
Not enough memory to use the Chop function.
>Delete unneeded sample data.
Not enough memory to use the Pitch function.
>Delete unneeded sample data.
Awaiting Digital Signal
You are attempting to sample the signal from DIGITAL IN, no signal is
detected.
>Check whether a digital signal is being output from the connected digital
device. (For details, refer to the manual for the connected device.)
The sampling frequency of the signal from DIGITAL
IN is not 44.1 kHz.
>Set the sampling frequency to 44.1 kHz. (For details refer to the manual of the
connected device.)
Not Sampling Bank!
Sampling is not possible since the Chop bank or the Pitch bank is selected.
>Switch to another pad bank.
Protected!
Deletion is not possible because the sample is
protected.
>Turn off the protect setting of the sample.
Overwriting is not possible because the sample is
protected.
>Turn off the protect setting of the sample.
Protected! Sure?
Initialization is not possible because the sample is
protected.
>To continue with initialization, press [F1] (YES).
To cancel, press [F2] (NO).
Too Busy
Notes are not sounded in time.
>Reduce the number of notes.
MIDI related
MIDI Off Line!
There is a problem with the MIDI cable connection.
>Check whether the MIDI cable has been disconnected or
broken.
46
MIDI Buffer Full!
Too many MIDI messages were received all at once,
and the SP-505 was unable to process all of them.
>Reduce the amount of MIDI messages being transmitted
to the SP-505.
MIDI Error!
A MIDI message was not received correctly.
>Check whether the MIDI cable has been disconnected or
broken.
>Check whether invalid MIDI messages are being
transmitted.
Song/pattern recording related
Memory Full!
Song/pattern cannot be saved because there is
insufficient space in user memory.
>Delete unneeded songs or patterns.
Too Much Data!
Recording/playback is not possible because there is too
much performance data, or because the BPM is too fast.
>Lower the BPM. Delete unneeded performance data.
Pattern REC Full!
No more data can be recorded in the pattern, since the
maximum number of notes that can be recorded has
been exceeded.
>Delete unneeded data from the pattern being recorded.
Song REC Full!
No more can be recorded in this song, since the
maximum number of patterns in one song has been
exceeded.
>A maximum of 999 patterns can be registered as part of
one song. No further patterns can be registered.
Card related
WARNING! Turn OFF Power Data Maybe
Damaged!
A card was inserted or removed while the power was on, or the power was
turned on when a card was inserted halfway.
>Turn off the power, remove the card or insert it correctly,
and then turn the power on once again.
Memory Full!
Data cannot be saved, since there is insufficient space
remaining on the memory card.
>Delete unneeded data.
There is not enough memory to load the WAV/AIFF
file.
>Delete unneeded samples. (p. 49)
>Reduce the size of the WAV/AIFF file.
Protected!
Sampling to a memory card bank is not possible
Advertisement
Table of Contents
