Reset Configuration Data - MSI MS-6182 User Manual

This section describes configuring the PCI bus system. PCI, or Personal
Computer Interconnect, is a system which allows I/O devices to operate at
speeds nearing the speed the CPU itself uses when communicating with its
own special components. This section covers some very technical items
and it is strongly recommended that only experienced users should make
any changes to the default settings.
CMOS Setup Utility - Copyright(C) 1984-1999 Award Software

Reset Configuration Data

Resources Controlled By
IRQ Resources
Memory Resources
PCI/VGA Palette Snoop
↑ ↓ → ← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized Defaults
Reset Configuration Data
Normally, you leave this field to Disabled. Select Enabled to reset
Extended System Configuration Data (ESCD) when you exit Setup if you
have installed a new add-on and the system reconfiguration has caused
such a serious conflict that the operating system can not boot.
The settings are: Enabled and Disabled .
PnP/PCI Configuration Setup
Disabled
Auto
Press Enter
Press Enter
Disabled
3-24
®
Item Help
Menu Level >