The transfer case buttons are located to the right of the
steering wheel on the instrument panel.
Recommended Transfer Case Settings
Driving Conditions
Normal
Severe
Extreme
Vehicle in Tow*
*See Recreational Vehicle Towing on page 4-51 or
Towing Your Vehicle on page 4-50 for further
information.
Transfer Case Settings
m
m
n
2
4
4
YES
YES
YES
Use these buttons to shift into and out of four-wheel
drive. You can choose from the following:
m
2
(Two-Wheel High): This setting is for driving in
most street and highway situations. Your front axle is not
engaged in two-wheel drive.
CAUTION:
{
Shifting the transfer case to NEUTRAL can
cause your vehicle to roll even if the
transmission is in PARK (P), or if you have a
manual transmission, even if you are in gear.
N
You or someone else could be seriously
injured. Be sure to set the parking brake
before placing the transfer case in NEUTRAL.
See Parking Brake on page 2-28.
YES
N (NEUTRAL): Shift the vehicle's transfer case to
NEUTRAL only when towing your vehicle.
m
4
(Four-Wheel High): This setting engages your
front axle to help drive your vehicle. Use four-wheel high
when you need extra traction, such as on snowy or
icy roads, or in most off-road situations.
2-25