Removing The Spare Tire And Tools - Chevrolet 2005 Uplander Owner's Manual

Hide thumbs Also See for 2005 Uplander:
Table of Contents

Advertisement

Removing the Spare Tire and Tools

The tools you will need are located in the storage
compartment at the rear of the vehicle, on the
passenger's side.
To remove the tools, do the following:
1. Open the liftgate. See Liftgate on page 2-22 for
more information.
2. Remove the convenience net, if equipped.
3. Open the jack storage compartment by lifting the
tab and pulling the cover off.
5-68
A. Jack
B. Strap
C. Bracket
D. Wing Nut
E. Bag and Tools
4. Remove the jack (A) and jacking tools (E) by
loosening and then removing the wing nut (D)
and bracket (C).
5. Separate the plastic pouch from the jack and
remove the jacking tools, including the folding
wrench and extension, from the pouch.
F. Tire Bag and Cable
Storage for
All-Wheel-Drive
Vehicles

Advertisement

Table of Contents
loading

This manual is also suitable for:

UplanderUplander 2006

Table of Contents