Table of Contents
Advertisement
Item
Mode name
I/P Switch
Switch Interlace and Progressive
in EE mode.
*Initial setting is "Interlace".
*This command is effective
during executing "White Picture
Output", "Magenta Picture
Output" and "RTSC Return in XP
(A & V)" modes.
Audio Mute
Check whether mute is applied
(XTMUTE)
normally by the timer
microprocessor.
Audio Mute
Check whether mute is applied
(XDMUTE)
normally by the Digital P.C.B..
Audio Pattern
The audio pattern stored in the
Output
internal memory is output
(Lch: 1kHz/-18dB)
(Rch: 400Hz/-18dB)
*Audio sound clock switching
operation of DAC can be
confirmed by sub command [2]
[4].
Description
Initial mode is Interlace
Switch Interlace/
Progressive
Initial mode (Audio 48kHz) Press [2] [3] in service
Audio 44.1kHz/48kHz
switching
FL display
Key operation
(Remote controller key)
Press [1] [4] in I/P Switch
mode.
*I/P are switched
alternately.
Press [2] [1] in service
mode.
Press [2] [2] in service
mode.
mode.
Press [2] [4] in Audio
Pattern Output mode.
*48 kHz / 44.1 kHz are
switched alternately.
Advertisement
Table of Contents
