Removing & Installing Body Components; Battery - Honda ACTIVA 125 2019 Manual

Removing & Installing Body Components

Battery

# #
Removal
Make sure the ignition switch is in the OFF
position.
1. Remove the battery lid.
2. Remove the battery holder by removing
bolt.
Negative
terminal
Battery
P. 66
2
Bolt
Battery holder
Positive
terminal
3. Disconnect the negative
the battery.
4. Disconnect the positive
the battery.
5. Remove the battery taking care not to
drop the terminal nuts.
# #
Installation
Install the parts in the reverse order of
removal. Always connect the positive
terminal first. Make sure that bolts and nuts
are tight.
Make sure clock information is correct after
the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
2
terminal from
terminal from
P. 19
2
P. 56
2
P. 103
65