Step 4 Front And Center Canopy Assembly; Step 5 Rear Canopy Assembly - GAGGLE Compass Trio Instruction Manual

STEP 4 Front and Center Canopy Assembly

Assemble Front and Center Canopy
Assembly to stroller.
Align spring tab (2) of Canopy
Assembly (E) through opening in the
cloth armrest (1) and into canopy
retainer (3). Assembly locks into place
with a click.
Repeat for both sides.
To remove Canopy Assembly depress
spring tab until it releases from the
canopy retainer.
If the tab does not release easily you
may use a straight screwdriver or equal
tool to depress the spring tab.
See Figure 5.
Note:
For Front and Center Canopy operation
see the Stroller Operation section.
Assemble Rear Canopy Assembly to
stroller.
Align Spring tab (1) of Rear Canopy
Assembly (D) into canopy retainer (2).
Assembly locks into place with a click.
Secure hook and loop straps (3) around
the canopy bow (4).
See Figure 6.
Wrap the lower portion of the Canopy
(5) around the outside of the handle
frame and press the hook and loop tabs
together. Wrap the upper portion of the
Canopy (6) around the inside of the
handle frame and Fold Lock Release
and press the hook and loop tabs
together.
To remove Canopy unwrap hook and
loop fasteners, depress the spring tab
and pull out on the Canopy Assembly.
See Figure 7.
Note: For Rear Canopy operation see
the Stroller Operation section.

STEP 5 Rear Canopy Assembly

D
1
2
7
E
1
2
3
Figure 5
4
Figure 6
Figure 7
AB20076_G6A
3
AB20076_G7A
6
5
AB20076_G11A