Table of Contents
Advertisement
Uerminal Panel
A
CC IO Connector
Connects with the supplied power cord.
B
Main Power Switch
On/Off switch to turn main power ON/OFF.
C
Cudio IO
Audio signal input from external equipment such as a
computer or player.
D
DisplayPort IUU
Output DisplayPort signals from DisplayPort IN1.
You can connect multiple monitors by using DisplayPort
daisy-chain connection. See MULTI DISPLAY
Video out
(page
68).
E
DisplayPort IO1/IO2
DisplayPort signals input.
F
HDMI IO1/IO2/IO3
Digital HDMI signals input.
G
RS-232C IO (D-Sub 9 pin)
Connect RS-232C input from external equipment, such as a
computer, in order to control RS-232C functions.
H
Remote IO
Use the optional sensor unit by connecting it to your monitor.
OIUEN: Do not use this connector unless specified.
I
microSD Card Slot
microSD memory card reader for use with the Media Player
(See
page
23).
To install the microSD card slot cover, please refer to
"Installing microSD card slot cover" (See
J
USB1:
USB2:
USB CM1 (2A): Power supply port.
USB CM2*: Service port. Please do not connect devices.
* USB functionality is available when the optional Raspberry
Pi Compute Module Interface Board and Raspberry Pi
Compute Module are installed.
USB MP:
(page
39) and
K
Connect to LAN in order to manage and control the monitor
over the network. See
OIUEN: Please give priority for use to LAN1.
L
Audio signal output from the AUDIO IN, DisplayPort and
HDMI to an external device (stereo receiver, amplifier, etc.).
OIUEN: This connector is not a Headphone terminal.
M
OIUEN: Please turn off the monitor's main power when you
use the Internal/External speaker switch.
N
page
23).
Audio signal output.
Red terminal is plus (+).
Black terminal is minus (-).
OIUEN: This speaker terminal is for 15 W + 15 W (8 ohm)
speaker.
O
English-11
USB Port
Downstream port (USB Type-A).
Connect USB devices.
Upstream port (USB Type-B).
Connect external equipment such as a
computer.
To control the monitor from connected external
equipment, please use this port.
USB storage device reader for use with the
Media Player. See
future software upgrades.
To use the Media Player, please connect USB
storage device to this port (See
MP is an abbreviation of Media Player.
LCO Port 1/2 (RJ-45)
page 48
and
Cudio IUU
Internal/External Speaker Switch
: Internal speaker
: External speaker.
External Speaker Uerminal
Internal Speaker
USB Upstream
page
22. This port is for
page
19).
page
51.
Advertisement
Table of Contents
